PLEASE NOTE:

Double-sided tape is not necessary in the whole installation process. Please notice that if you apply the tape to the cover, your return will be Invalid.

Installation Process

Step

Place the cover on the steering wheel, check each position to see if it is correct. If it is correct and lines up simultaneously with the steering wheel you may go ahead with the installation process.

Step

Stick the double-sided tape inside the wheel cover as shown in the picture, please do ensure you do not stick the double-sided tape to the edge of the cover.

Step

Double check again to ensure the cover is in the right position. This step is very important, if you do not adjust the cover correctly at this stage you may face problems in the next upcoming steps. Tear off the tape, then apply to the inside of the wrap.

Step

Fill the extra leather/material into the steering wheel, use the small tucking blade to help you fill the extra leather/material in to the steering wheel. As a precautionary measure you should fold the leather while filling, or the leather cover may get scratched.

Step

Stitch the steering wheel cover together.

Step

When sewing allow the whole part of the thread to go through every knot continuously.

Step

Tie a knot and cut the remaining thread and there you have it, you should have now finished the installation process and transformed your steering wheel!

Cart

INTERIOR

EXTERIOR

VEHICLE SECURITY

EXTRAS

INSTALLATION PROCESS

PLEASE NOTE:

Installation Process

Place the cover on the steering wheel, check each position to see if it is correct. If it is correct and lines up simultaneously with the steering wheel you may go ahead with the installation process.

Stick the double-sided tape inside the wheel cover as shown in the picture, please do ensure you do not stick the double-sided tape to the edge of the cover.

Double check again to ensure the cover is in the right position. This step is very important, if you do not adjust the cover correctly at this stage you may face problems in the next upcoming steps. Tear off the tape, then apply to the inside of the wrap.

Fill the extra leather/material into the steering wheel, use the small tucking blade to help you fill the extra leather/material in to the steering wheel. As a precautionary measure you should fold the leather while filling, or the leather cover may get scratched.

Stitch the steering wheel cover together.

When sewing allow the whole part of the thread to go through every knot continuously.

Tie a knot and cut the remaining thread and there you have it, you should have now finished the installation process and transformed your steering wheel!